Referenzen
-
Verdichtereinheit
Projektübersicht:
Kundenspezifisches Verdichteraggregat für Niedrigtemperaturanwendung.
Fakten
Vollständige Herstellung in unserer Fabrik.
Lieferumfang:
Verdichtereinheit mit Kraftstromfeld, Kontrollsystem, Installation und Inbetriebnahme
-
NH3-Kälteanlage
Projektübersicht:
NH3-Kälteanlage mit 10 Schraubenverdichtern arbeitet auf drei verschiedenen Temperaturniveaus.
Die Kälteanlage arbeitet als zentrale Versorgungseinheit für alle Verbraucher in der Fabrik. Eine zentrale Prozeßleitstelle ermöglicht Visualisierung und Steuerung des Systems.
Fakten
10 industrielle Schraubenverdichter.
Kälteleistung 10.500 kW.Lieferumfang:
Kälteausrüstung für den Maschinenraum, Ausrüstung für die Prozessräume, Montage und Inbetriebnahme.
-
Flüssigkeitskühlung
Projektübersicht:
Komplete NH3-Kälteanlage mit Schraubenverdichtern für Prozesskühlung. System wird betrieben mit einem zentralen Automatisierungssystem basierend auf industrieller SPS (Siemens).
Fakten
5 Verdichtereinheiten mit 560 kW Motoren
Lieferumfang:
Turn-key Projekt für eine Prozessanlage mit Installation und Inbetriebnahme.
-
BOG Application for Ammonia Storage
Polar Refrigeration delivered a screw compressor skid to a chemical plant where major part is production of ammonia (NH3).
Ammonia is one of the most highly produced inorganic chemicals. Ammonia production plants worldwide producing more than 130 million of tonnes of ammonia per year, mainly used for fertilizing agricultural crops. Furthermore Ammonia is also used for the production of plastics, fibres, explosives and intermediates for dyes and pharmaceuticals.
Today, most ammonia is produced on a large scale by the Haber-Bosch process with capacities of up to 3,300 metric tons per day. The generated liquid ammonia from the process is stored in storage tanks.
Due to heat entering the tanks during storage , a portion of the ammonia continuously evaporates, creating a gas called boil-off gas (BOG).
BOG leads to an increase of the pressure in the tanks and losses of ammonia through the safety or blow-off valve which could have an impact to economic and safety problems.
To maintain a constant pressure inside the storage tanks and to reduce losses over the ammonia supply chain the ammonia gas is continuously sucked off by a customized screw compressor skid made by Polar, where BOG is re-liquefied and sent back to the tanks. The screw compressor skid has been designed for operation in a hazardous zone.Principle
The ammonia gas is sucked off by a screw compressor through installed on skid liquid separator vessel to protect compressor from droplets of liquid. Than gas is compressed and transferred to condenser. Gaseous ammonia is liquefied by cooling water. The liquid ammonia is collected into a receiver vessel. From the receiver liquid ammonia is directed back towards the storage tank.
To increase availability of the system the most important parts of the system are redundant – compressor unit with oil circuits, oil pumps, oil filters, oil coolers, ammonia condensers.
In order to minimize the pollution of process ammonia with the compressor oil skid is equipped with specially designed efficient oil separator that guarantees oil carry over not more then 5 ppm.
The control logic of central control system is performed by remotely located PLC based on Simatic S7-300. Locally skid has explosion-proof control box to operate compressors during maintenance procedures.Fakten
Technical data
Make of compressor: GEA Grasso
Type of compressor: L-type, screw, oil flooded
No of compressor: 2 (1 working / 1 standby)
Refrigerant: NH3 (R717)
Design massflow: 2000 kg/h
Design suction pressure: 6,16 bar(a)
Discharge pressure: 17,8 bar(a)
Motor rated power: 160 kWATEX Specification
Zone: Zone 2
Group: II A
Temperature class: T1 -
Heizen & Kühlen
Projektübersicht:
Kundenspezifisches Heiz- und Kühlgerät mit Thermalöl.
Fakten
Vollständige Herstellung in unserer Fabrik.
Lieferumfang:
Thermostat mit Heizung und Kühlabteil, Pumpenstation, Steuerung, Installation und Inbetriebnahme.